Wirral Libraries have an Ultimaker Go 3D printer available to produce prints on request.
All you need to be is a member of the Library Service and you can then submit a 3D design (as an .STL or .OBJ file) to firstname.lastname@example.org
Largest build volume is: L / W / H - 120 x 120 x 115 mm
We will then contact you to let you know how much the print will cost and will wait for your confirmation before proceeding.
The finished print will be delivered to the Wirral library of your choice.
The cost of a print is calculated as follows:
- £1.00 per metre of material used (PLA.) Colours available are:
- Natural (clear)
- Dark Green
• 50p per hour the 3D printer is running
Wirral Libraries reserve the right to refuse requests for 3D prints if not possible or appropriate.